Flush Mount Boundary Microphone with Cardioid Pattern

• Customization: Available
• Color: Black
• Type: Voice Conferencing System
• Model NO.: VIS-BDY-T
• Composition: Regulator
• Communication: Wired
• Pointing Feature: Cardioid
• Transport Package: Carton
• Trademark: VISSONIC
• Origin: China
• HS Code: 85176239
• Production Capacity: 10000

Product Description

 

Detailed Photos

Product Description

VIS-BDY-F is a built-in microphone that makes the microphone hide on the desktop when not in use. This is achieved by simply pressing down on the top of the microphone until it locks. Then press the microphone again, and the microphone will rise back to its original position. This microphone can be used in the CLEACON Full digital network conference system through the VIS-AIB analog connection box, or it can be used in the analog system, such as VIS-FS100-A automatic feedback suppressor, mixer, audio processor, etc.

Features

 

1.Low profile on any desktop or surface
 

2.The microphone is equipped with a reed switch, which is designed to switch at the beginning and end of

each session when the microphone is no longer used. When the microphone is in the up position, the switch

contact is closed (ON), and when it is retracted, the switch will be OFF.
 

3.Capacitive touch button can be optionally installed to easily set the microphone off or on for sound pickup.
 

4.Cardioid pattern.
 

5.Built-in microphone preamp power supply module, no need to use external power supply module
 

6.The sturdy all-metal structure design provides two layers of steel mesh cover protection
 

7.The microphone works from DC 11V to 52V phantom power.
 

8.Output with 3-pin XLR or 3.5 Phoenix connector
 

9.Built-in ring-shaped LED status indicator
 

10.Built-in RF filter
 

11.Equipped with shock-proof isolators to reduce vibration noise on the installation surface
 

Product Parameters

 

Mic capsule ........ electrostatic capacitive type

Directivity Pattern ........ Cardioid

Frequency response ........ 40-19,000 Hz

Turn-on sensitivity ........ -40 dB (10 mV) at 1V at 1 Pa

Impedance ........ 200 ohm

High maximum ........ SPL 142 dB SPL, 1 kHz at 3% T.H.D.

Dynamic range ........ (typical) 113 dB, 1 kHz at highest sound pressure level

S / N....... 65 dB, 1 kHz at 1 Pa

Phantom power ........ DC 11-52V, power consumption 5.7 mA typical

Switch Touch control ........ On / Mute

Weight ........ 65 g

Overall ........ length 84.8 mm, diameter 38.0 mm, maximum width 48.0 mm

Output terminal ........ Built-in 3-pin XLR

Standard configuration ........ 1 pair of shock-proof isolator

Installation Instructions

 

Item Model for Order

VIS-BDY-F ...Flush mount boundary Microphone

VIS-AIB ........ Analog microphone connection box

VIS-DCP2000-D .............. Full Digital Network DSP Conference System Controller

VIS-FS100-A .............. Fully automatic feedback suppressor

Reference Project

Company Profile