VISSONIC Embedded Gooseneck Microphone Base with Touch Button Switch
VIS-GSK-F is a flush mount gooseneck microphone base that can be connected to all range of
VISSONIC M series microphones, the microphone can be removed from the base when it's not in
use. The overall base is small and exquisite, with a touch button to switch the microphone on and
off. It can be connected to the VIS-AIB analog microphone connection box and used in the
CLEACON conference system, or it can connect to an analog system, such as the VIS-FS100-A
automatic feedback suppressor, mixer, audio processor etc.
Features:
1.Built-in microphone socket, suitable for VIS-M series 6-pin gooseneck microphone
2. It is used for inconspicuous installation on the desktop with compact design.
3. Capacitive touch switch button can be optionally installed to easily set the microphone off or
on for sound pickup. The built-in switch can be used for control from remote equipment.
4. Touch button comes with LED status light, operates with phantom power, provides white / red
two colors
5. Operation with 24-48V phantom power
6. Output with 3-pin XLR or 3.5 Phoenix connector
7. After inserting the microphone in place, the microphone comes with fasten lock, and the
microphone can only be removed after unlock it
8. Built-in RF filter
9. Equipped with rubber isolators to reduce vibration noise on the installation surface
Specification
Output impedance: 360 Ω
control
High potential when pressed.: (DC + 5V);
Low potential when not pressed : (DC 0V)
LED indicator
High electric level DC + 5V) : red /
Low electric level (DC 0V) : white
Phantom power
DC: 24-48V,
Power Consumption: 4 mA typical
Switch
Touch control
Weight : 165 g
Dimensions: length 128.2 mm, maximum width 55.3 mm
Accessories
One set of metal retaining rings for standard installation, one pair of shock-absorbing insulators.
Application
Audited Supplier 
){kind=link}
){kind=link}